EasyManuals Logo

Sony STR-DA5800ES User Manual

Sony STR-DA5800ES
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #108 background imageLoading...
Page #108 background image
108
GB
x AMP
The HDMI audio signals from the playback
equipment is only output to speakers
connected to the receiver. The multi-channel
sound can be played back as it is.
Note
When “Control for HDMI” is set to “On,” “Audio
Out” may be changed automatically.
Lets you turn the H.A.T.S. (High quality
digital Audio Transmission System) function
on or off. When the H.A.T.S. function is turned
on, the sound quality is enhanced because
there is no jitter (timing gaps when reading
signals) when transmitting digital audio
signals.
x Off
x On
Notes
It takes some time to output the sound after a
playback operation is performed on the connected
equipment (e.g., pressing the PLAY button,
pressing the STOP button, pressing the PAUSE
button) due to limitations of the H.A.T.S. system.
The time lag depends on the sound source.
The H.A.T.S. function of this receiver works when
a Sony SCD-XA5400ES is connected to the
receiver.
While the H.A.T.S. function is working, sound is
not output from the front high speakers.
The H.A.T.S. function works only when “A.F.D.
Auto,” “2ch Stereo,” or “Headphone (2ch)” is
selected.
Stream information about the
H.A.T.S. function available
Lets you turn the function which controls
equipment connected to the HDMI jack using
an HDMI cable on or off.
x Off
x On
Note
This function is enabled only when “Zone2 Out” is
set to “Off.
Lets you output HDMI signals to the TV even
when the receiver is in standby mode. For
details, see “Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)” (page 78).
x Off
x On
x Auto
Lets you enable or disable the HDMI ZONE 2
OUT jacks.
x Off
x On
Lets you set the priority when you select the
same input for both the main zone and zone 2.
x Main & Zone 2
You can enjoy the same input in the main zone
and zone 2. However, there may be some
interference in the audio and video signals in
the main zone and zone 2.
H.A.T.S.
Audio signal input Sampling frequency
Linear PCM 2ch 44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz,
176.4kHz, 192kHz
Linear PCM Multi 44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz,
176.4kHz, 192kHz
DSD 2.8224 MHz
Control for HDMI
Pass Through
Zone2 Out
Priority

Table of Contents

Other manuals for Sony STR-DA5800ES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony STR-DA5800ES and is the answer not in the manual?

Sony STR-DA5800ES Specifications

General IconGeneral
Display-
Night modeNo
Product colorBlack
Audio decodersDolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-ES, DTS-HD
RS-232 interfaceYes
Apple docking compatibilityNot supported
Consumer Electronics Control (CEC)BRAVIA Sync
Connectivity technologyWired
12V trigger ports quantity3
Speakers connectivity typeRCA
Audio output channels9.2 channels
Power output per channel (20-20KHz@8 Ohm)125 W
HDMI in9
Audio (L/R) in1
Composite video in5
Ethernet LAN (RJ-45) ports4
Component video (YPbPr/YCbCr) in2
Headphone connectivity3.5 mm
Supported radio bandsAM, FM
Preset stations quantity60
Supported video modes1080p
Weight and Dimensions IconWeight and Dimensions
Depth420 mm
Width430 mm
Height187.5 mm

Related product manuals