123
GB
Using the Remote Control
a)
LD player only
b)
Deck B only
c)
DVD only
Turning off all connected
equipment
(SYSTEM STANDBY)
Even when this receiver is standby mode,
zone 2 or zone 3 remain turned on. To turn off
all Sony equipment, including connections to
each zone, press ?/1 and AV ?/1 on the
remote control at the same time.
Programming the remote
control
You can customize the remote control to match
the equipment connected to your receiver. You
can even program the remote control to
operate non-Sony equipment and also Sony
equipment that the remote control is normally
unable to operate.
The procedure below uses as an example a
case in which a VCR made by a company other
than Sony is connected to the VIDEO 1 IN
jacks on the receiver.
1 Press AV ?/1 while pressing RM
SET UP.
The RM SET UP button flashes.
AV ?/1
?/1
Numeric
buttons
AV ?/1RM SET
UP
ENT/
MEM
SHIFT
Input
buttons
continued
To Next Page
Loading...
Need help?
General
Weight and Dimensions
