188
1
Press the [M/E1] button in the key control block,
assigning the M/E-1 bank.
2
Press the [KEY] button in the M/E-2 bank Flexi Pad
control block to switch to key operation mode.
3
Press and hold the [KEY1] button in the key control
block and press the [KEY2] button in the Flexi Pad
control block.
Register Groups
You can group various registers used by the system, and
then recall them together.
16 groups are available, and each group consists of the
following register data.
• Snapshots
• Wipe snapshots
• DME wipe snapshots
• Key snapshots
• Master snapshots
• Shotboxes
• Master timeline
• Keyframe effects
•Macros
• Macro attachments
• When recalling registers from or saving registers to the
local drive and removable drives using the File menu,
only the data in the currently selected group is targeted.
To recall/save data for another group, the group must
first be changed.
• Menu macros are not included in a register group.
Selecting a register group
1
Open the Copy/Swap >Register Group menu (3121).
2
In the <Register Group Select> group, select a group
(Group 1 to Group 16).
The registers in the selected group are recalled
together.
Notes
To Next Page
Loading...
Need help?
General
