528
a) You can change the M/E banks that are to be disabled in the Engineering
Setup >Switcher >Config >Logical M/E Assign menu (7331.5).
Sub key restrictions
When using the XKS-8210 (for XVS-9000/8000) or
XKS-7210 (for XVS-7000/6000) Mix Effect Board, key 3
and key 4 function as sub keys in 3840×2160P signal
format. For sub keys, the following function and settings
restrictions apply.
You can set the sub key mode in the Setup menu (see
page 443).
a) When a dedicated input is used, signals configured using the Engineering
Setup >Switcher >Input >Dedicated Input Assign menu (7332.10) can also
be selected.
Resource Sharing
Configuration Operations
Resource sharing is configured using a computer
connected to the same network as the switcher control
station.
You can save and recall resource sharing configuration
data between the switcher system and a computer using the
file manager.
For details, see “File Manager” (page 532).
Preparations
Launch a browser on the computer, and access the menu
(Resource Share Setup) for configuring sharing resources.
For details about computer connection and accessing the
menu, refer to the ICP-X7000 Installation Manual.
1
Access Resource Share Setup.
The Resource Share Setup login screen appears.
2
Enter the administrator user name and password, and
click/tap [Login].
The Resource Share Setup page appears.
For the administrator user name and password, refer to
the ICP-X7000 Installation Manual.
Color backgrounds • Color background 2 not supported
• In SQD, [Multi], [Pairing], and
<Modulation> group settings not
supported
Multi viewers In SQD, screen split by 10, 13, and 16
not supported
Note
Item Restrictions
Transitions Independent key transitions only
supported
However, the following settings are not
supported.
• Wipe transition type
• DME wipe transition type
Key settings Luminance key and linear key only
supported
However, the following settings are not
supported.
• [Filter] parameter
• [Key Position]
• [Mix Color] in the <Fill Matte> group
•Edge
•Mask
•Blink
Key material On the XVS-8000, primary input, black,
white, and color background signals
only supported
a)
However, XKS-T8110 IP Input
Connector Board input signals not
supported
(No restrictions on the XVS-9000/
7000/6000)
Key priority Priority settings not supported
(Key 4 and key 3 are fixed at the top, in
that order, and key 1 and key 2 priority
can be configured below key 3.)
Resizer Resizer not supported
Key preview/Show
key
Key 3 only supported when the sub key
is set to [Key3 + Key PVW].
DMEs Functions relating to DMEs not
supported
Item Restrictions
Note
Note
To Next Page
Loading...
Need help?
General
