403
After restarting, the licensed software is now available
for use.
To cancel the license registration to disable
functions
Select the software (“Active” displayed in the “Condition”
field) whose license you want to cancel in the License
menu (7316.6). Press [Deactivate License] in the License
Management menu (7316.7), check the message, then
press [Yes].
Settings Relating to
Device Management
Setting the Date and Time
1
In the Engineering Setup >System >Maintenance
menu (7317), set the following parameters.
The specified date and time appear in the “Set” field in
the status area.
2
Press [Set Date/Time].
3
Check the message, then press [Yes].
Using a Removable Drive
“Removable Drive” refers to general-purpose external
USB-compatible storage devices connected to the system.
Displaying removable drive information
1
Connect a removable drive to the DEVICE connector
of the menu panel.
2
In the <USB Storage Device> group of the
Engineering Setup >System >Maintenance menu
(7317), press [Refresh].
Initializing a removable drive
Format a commercially available removable drive before
using it for the first time.
Parameter group [1/2]
No. Parameter Adjustment Setting
1 Hour Hour 0 to 23
2 Min Minute 0 to 59
3 Sec Second 0 to 59
Parameter group [2/2]
No. Parameter Adjustment Setting
1 Month Month 1 to 12
2 Day Day 1 to 31
3 Year Year 2000 to 2037
Note
To Next Page
Loading...
Need help?
General
