Sungrow SG125CX-P2 User Manual

User Manual 7 iSolarCloud App
7.8.2 Operation Parameters
Running Time
Tap Settings > Operation Parameters > Running Time to enter the corresponding interface.
figure 7-13 Running Time
PID Parameters
The PID function may not be applicable in some areas. Please consult SUNGROW
for details.
Tap Settings > Operation Parameters > PID Parameters to enter the corresponding inter
face.
figure 7-14 PID Parameters
table 7-6 PID Parameter Description
Parameter Description
PID Recovery
Enable/Disable the PID night recovery function. Once enabled, it
works between 22:00 pm and 5:00 am by default.
Clear PID alarm
If ISO impedance abnormality or PID function exception is detected
during running of the PID function, the inverter reports a PID abnor
mity and reminds the user to take corresponding measures. Clear
the alarm report via this parameter once the problems are handled.
PID Scheme Apply negative or positive voltage.
After the PID night recovery function is enabled, the fault indicator on the inverter
front panel turns green.
97

Sungrow SG125CX-P2 Specifications

General

Brand	Sungrow
Model	SG125CX-P2
Category	Inverter
Language	English