21
5 Mechanical Installation
5.1 Selecting Installation Location
Selecting an optimal installation location for the inverter is decisive for its operating
safety as well as its expected efficiency and service life.
y
Take the load capacity of the wall into account. The wall (such as concrete wall
and metal structure) should be strong enough to hold the weight of the
inverter over a long period of time.
y
Install the unit where is accessible to install, electrical connect or service.
y
Do not install the unit on the wall of flammable materials.
y
Do not install the inverter where contains flammable materials or flammable
gas in the vicinity of the unit installation.
y
Install the unit at eye level for easily buttons operation and display read.
y
It is suggested that the inverter be installed vertically or horizontally with the
bracket for good heat dissipation.
y
Never install the inverter with a forward tilt, nor with a backward tilt nor even
with upside down.
To Next Page
Loading...
Need help?
General