User Manual 5 Mechanical Installation
29
5.3.4 Horizontally Installing
Step 1 Remove the bracket and fasteners from the packaging.
Step 2 Assemble the bracket to the recesses on the back of the inverter and make
sure them fit perfectly together with the mounting ear. Fix the bracket with
two M4×16 screws.
Step 3 Install the fixing plates on the bracket.
Step 4 Assemble the cap onto the inverter for better weatherproof function.
Step 5 Move the inverter to the chosen position and attach the fixing plate to the
floor firmly with the supplied expansion bolt set.
Ensure there are no plants nearby!
To Next Page
Loading...
Need help?
General