3-61
OPERATING YOUR VEHICLE
75RM0-01E
Situations where the system may not
activate properly
Under the following situations, the system
may not activate.
• When driving on continuous curves
• When the vehicle speed changes
extremely
• Right after lane changing
If the stereo camera cannot detect partition
lines except for above situations, the sys-
tem may also not activate. Refer to “Situa-
tions where the stereo camera may not
activate properly” in this section for details.
Dual camera brake support OFF
switch
You can turn off the dual camera brake
support.
• In the following situations, push and hold
the dual camera brake support OFF
switch as unexpected dangers may be
possible if it is activated.
– When the vehicle is placed upon a tes-
ter such as when undergoing a vehicle
inspection
– When the vehicle is put up on a lift,
and the tires are idling
– When the vehicle is being towed
– When the vehicle is being carried on a
car carrier
– When the vehicle is being operated on
a race track
– When there is vinyl curtains or pendu-
lous branches in front of the vehicle
– When driving in the field covered with
grown grass
– When using an automatic car washer
– When the vehicle is placed upon a car
elevator or placed in a mechanical
parking lot
– With a spare tire or tire chains
equipped
– When you have a temporarily repaired
flat tire
– When you have an accident or break-
down
– When the automatic brake system is
activated more than necessary
– When tires are not inflated to the rec-
ommended tire inflation pressure
– With worn tires equipped
– With non-specified sized tires or
wheels equipped
– With a modified suspension equipped
– When attaching an item which inter-
feres with the visibility of the stereo
camera
– When the headlights are covered in
dirt
– When the optical axis of the headlight
is deviated
– With modified headlights and/or front
fog lights equipped
– When the vehicle is being weighed
down by heavy items
– When the vehicle is used to tow a
trailer
75RM308
To Next Page
Loading...
Need help?
General
