DRIVE TRAIN 4-27
• Remove the bearing out of the cover with the special tool.
# 09913-70210: Bearing installer set
NOTE:
If there is no abnormal condition, the bearing removal is not nec-
essary.
"
• Remove the oil seal out of the case with a suitable tool.
NOTE:
If there is no abnormal condition, the oil seal removal is not nec-
essary.
"
• Remove the bearing out of the case with the special tool.
# 09913-70210: Bearing installer set
NOTE:
If there is no abnormal condition, the bearing removal is not nec-
essary.
"
• Remove the bearing from the shaft with a commercially avail-
able bearing puller or hydraulic press.
NOTE:
If there is no abnormal condition, the bearing removal is not nec-
essary.
"
The removed bearing must be replaced with a new
one.
The removed oil seal must be replaced with a new one.
The removed bearing must be replaced with a new
one.
The removed bearing must be replaced with a new
one.