8-22 ELECTRICAL SYSTEM
TROUBLESHOOTING
Does not shift to 2WD/4WD
(2WD/4WD motor will not run.)
Check the 2WD/4WD motor.
(
:
8-23)
Clicks
Runs
• Faulty 2WD/4WD selecting relay
• Improper 2WD/4WD motor
coupler connection
• Faulty 2WD/4WD motor
Does not run
• Faulty 2WD/4WD selecting button
Correct
• Open circuit in wire harness
Incorrect
• Faulty 2WD/4WD selecting relay
Incorrect
Check the 2WD/4WD selecting button.
(
:
8-33)
Check the 2WD/4WD selecting relay.
(
:
8-23 to 8-24)
Check the 2WD switch or 4WD switch
(
:
8-24)
• Faulty 2WD switch or 4WD switch
Incorrect
Correct
Correct
The 2WD/4WD motor runs, but does not shift to 2WD/4WD.
Check the front differential sliding dog. (
:
4-7)
Turn on the ignition switch. Listen for a click
from the 2WD/4WD selecting relay when the
2WD/4WD selecting button is pushed.
No click