Suzuki LT-F500F 2002 User Manual

7-30 CHASSIS
MASTER CYLINDER INSPECTION
MASTER CYLINDER
Inspect the master cylinder bore for any scratches or damage. If
any damages are found, replace the master cylinder with a new
one.
PISTON AND RUBBER PARTS
Inspect the piston surface, primary cup, secondary cup and dust
seal for any scratches, wear or damage. If any damages are
found, replace the piston set with a new one.
MASTER CYLINDER REASSEMBLY AND
REMOUNTING
Reassemble and remount the master cylinder in the reverse
order of removal and disassembly. Pay attention to the following
points:
$
' Specification and classification: DOT 4
* Wash the master cylinder components with new
brake fluid before reassembly.
* Do not wipe the brake fluid off with a rag after wash-
ing the components.
* When washing the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvents such as gasoline, kerosine, etc.
* Apply brake fluid to the master cylinder bore and all
the component to be inserted to the bore.

Suzuki LT-F500F 2002 Specifications

General

Brand	Suzuki
Model	LT-F500F 2002
Category	Offroad Vehicle
Language	English