Suzuki LT-F500F 2002 User Manual

4-28 DRIVE TRAIN
• Remove the pinion gear pilot bearing with the special tools.
# 09921-20240: Bearing remover set
09917-50410: Bearing remover
NOTE:
If there is no abnormal condition, the bearing removal is not nec-
essary.
"
REAR DRIVE INSPECTION
PARKING/REAR DRIVE SHAFT
Inspect the parking pawl and parking gear for wear and damage.
If any defects are found, replace the pawl and gear as a set.
PARKING PAWL AND PARKING GEAR REMOVAL !4-23,
24.
Inspect the splines of rear drive shaft and its coupling joints for
wear or damage.
Also, inspect the boot for cuts or damage.
If any defects are found, replace the rear drive shaft and cou-
pling joint with the new ones.
Inspect the parking cam, thrust bearing and return spring for any
flaws or damage. If any defects are found, replace the cam, ber-
ing and spring with the new ones.
PARKING CAMSHAFT REMOVAL !4-23.
The removed bearing must be replaced with a new
one.

Suzuki LT-F500F 2002 Specifications

General

Brand	Suzuki
Model	LT-F500F 2002
Category	Offroad Vehicle
Language	English