7-14 CHASSIS
FRONT DRIVE SHAFT
CONSTRUCTION
REMOVAL
• Remove the front drive shaft. (!4-3)
INSPECTION AND DISASSEMBLY
Inspect the boots for wear or damage. If any damages are
found, replace the boots with new ones.
Inspect the stopper ring, snap ring and boot bands for wear or
damage. If any damages are found, replace them with new
ones.
Inspect the axle play by using a push-and-pull motion given to
the axle shaft and wheel spindle, as shown.
Circlip
Differential side joint set
Differential side boot set
Snap ring
Circlip
Differential side outer boot clamp
Differential side inner boot clamp
Wheel side inner boot clamp
Wheel side outer boot clamp
Boot set
To Next Page
Loading...
Need help?
General
