CHASSIS 7-45
STEERING SHAFT AND HOLDER
Inspect the steering shaft for distortion or bends. If any damages
are found, replace the steering shaft with a new one.
Inspect the two steering shaft holders for wear or damage. If any
damages are found, replace the steering shaft holders with new
ones.
STEERING SHAFT BUSHING
Inspect the steering shaft bushing
1 for wear and damage. If
any damages are found, replace it with a new one.
• Remove the steering shaft bushing with the special tools.
* 09917-23711: Ring nut socket
09924-84510: Bearing installer set
• Install the steering shaft bushing with the special tool.
* 09924-84510: Bearing installer set
To Next Page
Loading...
Need help?
General
