ELECTRICAL SYSTEM 8-27
CLOCK
Displays the time (hour and minutes) on a 12-hour clock.
Setting the time
Hold down the button over two seconds and then flashing
the minute display.
2 Select the correct minutes by
pressing the button.
Decide the minutes by pressing the ODO/TRIP button, and then
flashing the hour display.
2 Select the correct hour by press-
ing the button.
Decide the hours by pressing the ODO/TRIP button.
GEAR POSITION INDICATOR
Gear Position Indicator
The gear position indicator indicates shift lever positions: P, R,
N, 1, 2, 3, 4, 5.
P: Shift lever is in parking position. The parking indicator also
comes on.
R: Shift lever is in reverse position. The reverse indicator also
comes on.
N: Shift lever is in neutral position. The neutral indicator also
comes on.
1 to 5: Numeral indicates gear position.
Transfer Position Indicator
LOW: Shift lever is in low position.
NOTE:
* In conbination other than the above, brinking of error display “–” shall be performed.
* When shift lever is the position of parking, not neutral position and reverse position, parking indicator light
would be blinking.
min.
hour