3-8
BEFORE DRIVING
69TB-01E
69T030080
3) Move the lever (5) in arrow direction by
using a flat-bladed screwdriver to
unlock the tailgate.
4) Push open the tailgate from inside. The
tailgate will be latched again by simply
closing the tailgate.
If the tailgate cannot be unlatched by push-
ing the unlatch switch (1), have the vehicle
inspected by an authorized SUZUKI dealer
or a qualified workshop.
Keyless entry system
By pressing the operational part of the
keyless push start system remote con-
troller within the range of about 2 m (6.6
ft) from the vehicle, you can lock/unlock
all doors.
Whenever locking the vehicle, make
sure to pull on the door handle to con-
firm that it is locked.
NOTE:
• The working distance of the keyless
entry system may change due to the
influence of the surroundings. Also, key-
less entry system may not work in places
where strong radio waves, etc., are gen-
erated.
• When leaving the vehicle even for a
short period of time, do not leave cash or
valuables in the vehicle, to avoid risk of
theft.
• If you cannot lock/unlock the door with
the keyless push start system remote
controller, use the actual key to lock/
unlock the door.
• When the keyless entry system does not
operate at the correct distance, the bat-
tery in the keyless push start system
remote controller may be dead.
• If you operate the keyless push start sys-
tem remote controller more than neces-
sary, battery life will be drained quicker
than normal.
• For purchasing keyless push start sys-
tem remote controller and registering
personal identification codes, consult an
authorized SUZUKI dealer or a qualified
workshop.
CAUTION
Check that there is no one near the
tailgate when pushing open the tail-
gate from inside the vehicle.
WARNING
To prevent accidents such as fire
and theft, stop the engine and lock
the doors whenever leaving the
vehicle.
NOTICE
Precision electronic parts are incor-
porated into the keyless push start
system remote controller. Observe
the following in order to prevent the
breakdown of its electronic parts.
• Do not place the keyless push start
system remote controller in areas
where it will get hot, such as on top
of the instrument cluster.
• Do not drop the keyless push start
system remote controller or allow it
to sustain strong impact.
• Do not wash the keyless push start
system remote controller or allow it
to make contact with water.
To Next Page
Loading...
Need help?
General
