5-8
OPERATING YOUR VEHICLE
69TB-01E
• If this light blinks or turns on for about 5
seconds, you may not be able to start
the engine. Check the position of the
keyless push start system remote con-
troller, change the ignition mode to
LOCK (OFF), and then change it back to
ON. Also, refer to “Master warning indi-
cator light blinks and engine cannot be
started” (P.5-14).
• This light will blink when the remote con-
troller outside warning operates as well.
Refer to “Remote controller outside
warning” (P.5-12).
NOTE:
• If this light turns on or blinks, the infor-
mation display in the instrument cluster
will show the following message.
• If you lose your remote controller, ask an
authorized SUZUKI dealer or a qualified
workshop as soon as possible to deacti-
vate the lost one, and to make a new or
remote controller.
• If you own other vehicles with immobi-
lizer keys, keep those keys away from
the engine switch when using your
SUZUKI vehicle. Otherwise, the engine
may not be started because they may
interfere with your SUZUKI vehicle’s
immobilizer system.
• If you attach any metal objects to the
remote controller, it may not start the
engine.
Pedal
Manual transmission
80J2121
CVT
80J2122
NOTICE
The remote controller is sensitive
electronic instrument. To avoid dam-
aging it:
• Do not expose it to impacts, mois-
ture or high temperature such as
on the dashboard under direct sun-
light.
• Keep it away from magnetic
objects.
69T040170
“SERVICE
START SYSTEM”
(2)(1)
(3)
(3)
(2)
To Next Page
Loading...
Need help?
General
