3-26
BEFORE DRIVING
69TB-01E
Headlight leveling switch
69T030280
Level the headlight beam according to the
load condition of your vehicle by turning
this switch. The chart shows the appropri-
ate switch position for different vehicle load
conditions.
Turn signal control lever
You can use the turn signal control lever
when the engine switch is in ON mode.
Turn signal operation
With the ignition mode ON, move the lever
upward or downward to activate the right
or left turn signals.
69T030260
• Move the turn signal control lever (1) as
follows:
– Turning left: Move the lever down-
ward.
– Turning right: Move the lever upward
• When you move the lever, the turn signal
lights and the turn signal light indicators
on the instrument cluster will flash simul-
taneously.
• When you move the lever to its original
position, the turn signal lights and the
turn signal light indicators on the instru-
ment cluster will be turned off.
• When changing lanes, if you lightly press
the turn signal control lever in the direc-
tions (a) or (b) in which you want to
change lanes, the turn signal lights and
turn signal light indicators on the instru-
ment cluster will flash only while the turn
signal control lever is pressed.
NOTE:
If the angle by which you turn the steering
wheel is small, the lever will not return
automatically to its original position. In this
case, return the lever to its original position
manually.
Vehicle Load Condition
Switch
Position
Driver only 0
Driver + 1 passenger
(in front seat)
0.5
Driver + 4 passengers,
no cargo
2.5
Driver + 4 passengers,
cargo added
3
Driver + full cargo 4.5
(a)
(b)
(1)
Turning right
Turning left
To Next Page
Loading...
Need help?
General
