5-45
OPERATING YOUR VEHICLE
69TB-01E
If you cannot shift CVT gearshift
lever out of “P” (PARK)
Left hand drive vehicle
80SS03040
Right hand drive vehicle
69T051260
Vehicle with a CVT have an electrically
operated park-lock feature. If the vehicle’s
lead-acid battery is discharged, or there is
some other electrical failure, the CVT can-
not be shifted out of Park in the normal
way. Jump starting may correct the condi-
tion. If not, follow the procedure described
below. This procedure will permit shifting
the transmission out of Park.
1) Be sure the parking brake is firmly
applied.
2) If the engine is running, stop the
engine.
3) Make sure the key is in “ON” or “ACC”
position, or the ignition mode is ON or
ACC.
4) Remove the cover (1) by using a flat-
bladed screwdriver covered with a soft
cloth as shown.
5) With the release button (2) pushed by
the key or the flat end rod, push the
knob button (3) and shift the gearshift
lever to the desired position.
This procedure is for emergency use only.
If repeated use of this procedure is neces-
sary, or the procedure does not work as
described, take the vehicle to an autho-
rized SUZUKI dealer or a qualified work-
shop for repair.
Gearshift indicator
52RM30410
In the following cases, the gearshift indica-
tor is indicated in the information display
when the ignition mode is ON.
• For manual transmission vehicle, when
the gearshift lever is in a position other
than “N” (Neutral).
• For CVT vehicle, when using the manual
mode.
The electronic control system monitors
driving condition (such as vehicle speed
and/or engine revolution), and it shows
which gear position is optimal for your driv-
ing with the indication on the display.
(3)
(1)
(2)
To Next Page
Loading...
Need help?
General
