Tait T 9100 Series User Manual

60 Making P25 trunk calls
Making a phone call
Caution In some situations, your call will not
proceed. For an explanation of the radio behavior, see
"Unconnected calls" on page 61.
To make a phone call on a trunk network:
1 Press Menu and select Phone call.
2 Select whether you want to enter a phone number
(Dialed number) or select an entry from the
address book.
3 Press Select.
If you are accessing the address book for the first
time after turning on the radio or changing the
mode, you are asked to select the default address
book (Personal or Standard).
4 Enter the number or select from the address book
and press Call, or press the PTT key.
The address book will only show applicable
entries.
5 Press and hold the PTT key to transmit.
6 When you hear three short beeps, speak clearly
into the microphone and release the PTT key when
you have finished talking.
Menu
Phone call
Dial radio call
SelectBack
Phone call
Dialed number
Address book
SelectCancel

Tait T 9100 Series Specifications

General

Brand	Tait
Model	T 9100 Series
Category	Two-Way Radio
Language	English