5
Total Control Systems www.tcsmeters.com
TCS 3000 Register Start Up:
Caution
Before Placing this product into service, make sure that the register
has been properly calibrated and setup for the type of fluid being
measured. This includes calibration factor, compensation type,
compensation parameter, product type, valve settings, no flow
timeout and others. Refer to the operation manual supplied with the
register for instructions. Failure to properly calibrate and setup the
register can result in unexpected operation, inaccurate measure-
ments and damage to equipment or property.
SHIFT + MODE (SAME TIME) = SYSTEM MENU
Navigation Keyboard Functions
Start/Enter Key
Stop/Cancel Key
Arrow Keys
Power Light
Power Light Allows you to see that there is power to the electronic register.
Start/Enter Key Allows you to enter register functions and start deliveries.
Stop/Cancel Key Allows you to stop a delivery and cancel an operation.
Arrow Keys Allow you to move to different fields on the Register.
WARNINGS:
WARNING– EXPLOSION HAZARD– DO NOT DISCONNECT EQUIPMENT WHILE THE CIRCUIT IS LIVE
OR UNLESS THE AREA IS KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS
WARNING– EXPLOSION HAZARD– SUBSTITUTION OF ANY COMPONENT MAY IMPAIR SUITABILITY
FOR CLASS 1, DIVISION 2.