Setup
Enable — Check this box to enable this function.
IP Address — Enter the IP address to reserve.
MAC Address — Enter the MAC address of the device to reserve the IP address to.
Click the Apply button to save your changes; the reserved IP address is listed on the
DHCP Reserved Address table. Or, to discard changes, click the Cancel button.
5.4 Time and Date
The Time and Date page allows you to configure the time and date of your network
by setting the time zone, synchronizing with a Network Time Protocol (NTP) server or
manually set the time and date.
To access the Time and Date page, click SETUP > Time and Date.
Wireless ADSL2+ Gateway 39
To Next Page
Loading...
Need help?
General
