Advanced
DS-Lite — Check this box to enable the Dual-Stack Lite (DS-Lite) function. DS-Lite is
used to omit IPv4 address deployment from Customer-premises equipment (CPE)
devices but instead use the global IPv6 address provided.
AFTR IPv6 Address — Enter an After Family Transition Router (AFTR) IPv6 address.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.
6.4.2 Autoconfiguration (Stateless/DHCPv6)
On My IPv6 Connection is, select Autoconfiguration (Stateless/DHCPv6).
Connection Name — Select an Internet connection to use. This is the connection that
you set up in SETUP > Internet Setup page. See “Internet Setup” on page 21.
IPv6 DNS Settings
Connection Name — Enter the connection name provided by your ISP or a desired
connection name.
DHCP Mode — Select the DHCP mode recommended by your ISP.
Obtain a DNS Server address automatically — Select to obtain the DNS sever
automatically.
Use the following DNS address — Select to manually set the DNS Server addresses.
When selected, enter the Primary DNS Address and Secondary DNS Address provided
by your ISP.
Wireless ADSL2+ Gateway 49
To Next Page
Loading...
Need help?
General
