Advanced
DS-Lite — Check this box to enable the Dual-Stack Lite (DS-Lite) function. DS-Lite is
used to omit IPv4 address deployment from Customer-premises equipment (CPE)
devices but instead use the global IPv6 address provided.
AFTR IPv6 Address — Enter an After Family Transition Router (AFTR) IPv6 address.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.
6.4.4 IPv6 in IPv4 Tunnel
On My IPv6 Connection is, select IPv6 in IPv4 Tunnel.
Connection Name — Select an Internet connection to use. This is the connection that
you set up in SETUP > Internet Setup page. See “Internet Setup” on page 21.
IPv6 in IPv4 Tunnel Settings
Connection Name — Enter the connection name provided by your ISP or a desired
connection name.
Remote IPv4 Address — Enter the remote IPv4 address provided by your ISP.
Remote IPv6 Address — Enter the remote IPv6 address provided by your ISP.
Local IPv4 Address — Enter the local IPv4 address provided by your ISP.
Local IPv6 Address — Enter the local IPv6 address provided by your ISP.
Primary DNS Address and Secondary DNS Address — If provided by your ISP, enter the
DNS server address. Otherwise, leave the fields blank.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.
Wireless ADSL2+ Gateway 51
To Next Page
Loading...
Need help?
General
