Setup
Wireless ADSL2+ Gateway 40
Sync By Time Zone
Time Zone — Select the time zone in your location. To set the network time and date
according to the selected time zone, click the Sync Time button at the bottom of the
screen.
Sync With NTP Server
NTP (Network Time Protocol) — Check the Enable box to synchronize the network
time and date with an NTP server.
• Server 1 IP or Domain name: Enter the IP address or the domain name of
the NTP server to synchronize your network with.
• Server 2 IP or Domain name: Enter the IP address or the domain name of
another NTP server to synchronize your network with in case Server 1 is not
available.
• First Poll Frequency: Enter the number in seconds of the first poll.
• Thereafter Frequency: Select the succeeding frequency from the drop-down
list.
Daylight Saving — Check the Enable box to enable daylight saving time.
• Start Time: Select the month and the day to start the daylight saving time.
• End Time: Select the month and the day to end the daylight saving time.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.
Manual Setup
To manually set the time and date of your network, select the Year, Month, Day,
Hour, Minute, and Second from their corresponding drop-down lists. Click the Set
Time button to apply the changes.
To Next Page
Loading...
Need help?
General
