Maintenance
Click the Browse button and browse for the file. Click the Apply button to start
firmware upgrade.
WARNING:
Do not turn off or press the Reset button on your Wireless Gateway while firmware
upgrade is in progress. Doing so will crash the system.
7.8 Configuration
Backup/Restore
This page allows you to save a backup of your current settings, revert settings to a
backup point, or restore the default factory settings.
To access the Configuration Backup/Restore page, click MAINTENANCE >
Configuration Backup/Restore.
Backup Settings
To backup the current settings, click the Backup Settings button.
Restore Settings
To restore settings from a backup point, do the following:
1. Click the Browse button.
2. Browse for the backup file, and then click the Open button.
Wireless ADSL2+ Gateway 92
To Next Page
Loading...
Need help?
General
