Specifications
1-4
CSA7404B, TDS7704B, TDS7404B, TDS7254B & TDS7154B Service Manual
Automatic Measurements. Choose from a large palette of amplitude, time, and
histogram measurements. You can customize the measurements by changing
reference levels or by adding measurement gating.
Mask Test ing. Optional on TDS7000B Series. Provides mask testing for verifying
compliance to optical (CSA7000B Series only) and electrical standards. Optical
mask testing uses integrated reference receivers.
Simple and Advanced Trigger Types. Choose simple edge trigger or choose from
eight advanced trigger types to help you capture a specific signal fault or event.
Dual Triggers. Use the A (main) trigger system alone or add the B trigger to
capture more complex events. You can use the A and B triggers together to set
up a delay-by-time or delay-by-events trigger condition.
Comm Triggers. Optional on TDS7000B Series. Use comm triggers to trigger on
communication signals.
Serial Triggers. Optional on TDS7000B Series. Use serial triggers to trigger on
serial pattern data.
Recovered Clock and Data Triggers. Use recovered clock and data internally to
trigger your waveforms. They are also available externally (CSA7000B Series
only).
Autoset. Use Autoset to quickly set up the vertical, horizontal, and trigger
controls for a usable display. If a standard mask is active (optional on TDS7000B
Series), Autoset adjusts the selected waveform to match the mask, if possible.
Touch Screen Interface. You can operate all instrument functions (except the
power switch and the touch screen enable/disable switch) from the touch screen
interface. If convenient, you can also install a mouse and keyboard to use the
interface.
Toolbar or Menu Bar. You can choose a toolbar operating mode that is optimized
for use with the touch screen, or a PC-style menu bar operating mode that is
optimized for use with a mouse.
Trigger Features
Convenience Features
To Next Page
Need help?
General
