Operating Information
CSA7404B, TDS7704B, TDS7404B, TDS7254B & TDS7154B Service Manual
2-7
Operating Information
This section covers basic operation information so that you can operate and
prepare to service the instrument.
You should always back up your user files on a regular basis. Use the Microsoft
Backup tool to back up files stored on the hard disk. The Backup tool is located
in the System Tools folder in the Accessories folder.
1. Minimize the instrument application by selecting Minimize from the File
menu.
2. Select the Windows Start button, point to Programs, Accessories, System
Tools, and then click Backup.
3. Use the Microsoft Backup tool to select your backup media and to select the
files and folders that you want to back up. Use the online help for informa-
tion on using the Backup tool. You can back up to the floppy drive, or to a
third-party storage device over the printer port (rear panel).
This section shows the main parts of the user interface.
The following illustration shows the instrument in the Menu bar mode. All
features of the instrument can be accessed through the menus using a mouse or
the touch screen.
When the instrument is in the Tool bar mode, most of the control windows can
be accessed by touching buttons at the top of the display.
Back Up User Files
User Interface Map
To Next Page
Need help?
General
