Tektronix TDS3000 Series Program Manual

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 205
MATH:VERTical:UNITs
Sets or returns the math waveform vertical measurement unit value.
Math
MATH:HORizontal:UNITs <Qstring>
MATH:HORizontal:UNITs?
<Qstring> is a text label to apply to vertical units when the vertical unit is “?”
(unknown unit value).
MATH:VERTICAL:UNITS?
might return :MATH:VERTICAL:UNITS ”joules” indicating that the math
vertical unit label for unknown values is joules.
MATH1 Commands
The MATH1 commands listed in Table 2--38 are the same as their associated
MATH commands, and are for compatibility with other Tektronix instruments.
Refer to the equivalent MATH command for syntax and function information.
Math
Table 2- 38: MATH1: commands
MATH1:DEFINE MATH1:HORizontal:POSition MATH1:HORizontal:SCAle
MATH1:HORizontal:UNITs MATH1:SPECTral:MAG MATH1:SPECTral:WINdow
MATH1:TYPe M ATH1:VAR1 MATH1:VAR2
MATH1:VERTical:POSition MATH1:VERTical:SCAle MATH1:VERTical:UNITs
Group
Syntax
Arguments
Examples
Group

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English