To Next Page

To Previous Page

Section 5 - Vector Mode

5-4

VM700A Option 01 (NTSC) & Option 11 (PAL) User Manual

In the Vector mode, pressing the Select Line button changes the control knob

function to digital line select and displays the following menu:

Field Toggle: displays the system line in the other field. For PAL, if the

current line is between 1 and 313, it adds 313; if the current line is between

314 and 625, it subtracts 313.

Find Colorbars: searches from the system line through the frame for a line

containing color bars, and displays it if found.

Vector Line: when highlighted, changes the Vector mode line independently

of the system line.

Field n Line nn (NTSC)/Line n (PAL): displays the line specified by the

softkey. To change the line number, select and hold the softkey to be

changed, turn the knob until the new line number is found, and release the

softkey.

Select Line

Tektronix VM700A User Manual

Other manuals for Tektronix VM700A