Tenda F6 User Manual

2
1.2.2 Ports and buttons
Button/Port
Description
WiFi/RST
WiFi on/off button and reset button.

Hold the button down for 1~3 seconds to turn on or off the WiFi network of the router.

Hold the button down for about 8 second, then release when the LED indicator blinks
fast. The router is reset successfully.
LAN1/2/3
Used to connect to the wired devices such as computers or switches.
WAN
Used to connect this router to the internet.
PWR
Used to connect to the included power adapter.
1.2.3 Label
The bottom label shows the SSID, login IP address, serial number and MAC address of the router.
See the following figures:
IP Address: It is the default address used to log in to the web UI of the router.
MAC: It specifies the MAC address of the router.
SSID: It specifies the default WiFi name of the router.
S/N: If there goes something wrong with your device and you need to send it to our technical staff
for repair, you will need this sequence number.

Tenda F6 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Antennas quantity	4
Antenna gain level (max)	5 dBi
Product type	Tabletop router
Product color	White
LED indicators	WLAN
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Frequency band	2.4 GHz
Firewall security	Support Oray.com，88ip
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Cables included	LAN (RJ-45)
Certification	CCC, CE
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
DSL WAN	No
WAN connection type	RJ-45
Power source type	DC
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	211 mm
Width	204 mm
Height	147.5 mm