30
Step 2 Click OK.
---End
Verification
Verify that the unknown device is added to Blocked Devices list.
The device in Blocked Devices list cannot be connected to the router.
To remove the device from the Blocked Devices list, click the Remove button and click OK.
3.5 Wireless Repeating
The wireless repeating function enables a wireless router to function as a wireless repeater or an AP to
extend wireless network coverage. At least two wireless routers are required for implementing this
function. You can use this router to extend wireless network coverage in WISP, Universal Repeater or AP
mode.
If wireless repeating is enabled, some functions of the router are not available. For details, refer to the message
on web UI after enabling these modes.
Application Scenario
User A subscribes to an 8 Mbps broadband service and purchases a wireless router for setting up an
LAN with internet connectivity in his apartment, which has three bedrooms, one dining room, one living
room, two restrooms, and one kitchen. The router is placed in the living room. The WiFi signals are
To Next Page
Loading...
Need help?
General
Weight and Dimensions
