46
MTU
MTU specifies the maximum size of a packet that the router can transmit. MTU varies across connection
types. The default setting is recommended.
You can try changing the MTU when:
You cannot access some websites or encrypted websites (such as online banking
or Paypal websites).
You cannot access an FTP server or a POP server.
For details, refer to Q8 in FAQ.
Clone MAC
It specifies the MAC address of the router. If the router cannot access the internet after you configure its
internet settings, your ISP may have bound your account with the MAC address of your computer that
was used to verify internet connectivity after you subscribed to the internet service. Therefore, only the
computer can access the internet with the account.
In this case, you can try either of the following methods to address the issue.
Method 1:
Procedure
Step 1 Connect the computer to the router.
Step 2 Log in to the router web UI.
Step 3 Choose Administration > WAN Parameters.
Step 4 Set Clone MAC to Clone Local Host’s MAC.
Step 5 Click OK.
---End
Method 2:
Procedure
Step 1 Connect another device (such as a smart phone or tablet) to the router.