21
Automatic Circuit Breaker
The TEMPUS Controller features an electronic circuit breaker which automatically
detects an overload condition on a station terminal during operation and turns o the
station before controller damage can occur. The TEMPUS Controller advances to the
next programmed station in sequence to continue the watering cycle.When a station
is found short circuited, INFO-SHORT CIRC will be displayed while in Automatic
operation mode.
Run an Electric Test to verify current wiring conditions. When all station numbers
are displayed as short circuited, the master valve is malfunctioning. When a short
circuited station is found not short circuited any more the INFO-SHORT CIRC is
removed.
Important: The most common cause of an overload condition is a short circuit in the
valve wiring or a malfunctioning valve solenoid. The cause of the overload condition
should be corrected before continuing to operate the controller.
Local Wi-Fi Module
With the optional Wi-Fi Module the TEMPUS Controller can be accessed locally via
Wi-Fi from a Smartphone.
Installing the optional Wi-Fi Module
• Remove the Empy case 34a from the rear
of the Programming Module 1 by sliding
it up.
• Connect the optional Wi-Fi Module 34b in
the same location where the Empty case
was by sliding it down.
Installing the App on your Smartphone
• Go to your APP Store and search for “TEMPUS Controller”.
• Download and install on your Smartphone the APP “TEMPUS
Controller”.
• Start the APP “TEMPUS Controller” and follow the procedure for login and for
matching the APP to the TEMPUS Controller.
AUTOMATIC CIRCUIT BREAKER
Toro TEMPUS Controller 4
_
6
_
8
LOCAL WI-FI MODULE
English
To Next Page
Loading...
Need help?
General
