8-12
User’s Manual
OPTIONAL DEVICES
High Capacity 2nd Battery Pack
To charge a High Capacity 2nd Battery Pack, follow the steps below.
1. Connect the computer to the Slim Port Replicator.
2. Connect the dedicated cable to the Slim Port Replicator and to a High Capacity
2nd Battery Pack.
3. Connect an AC Adaptor to the Slim Port Replicator.
NOTES: 1. You cannot use a High Capacity 2nd Battery Pack to
power a Slim Port Replicator.
2. You must connect the High Capacity 2nd Battery Pack and
an AC adaptor to the Slim Port Replicator to charge the
High Capacity 2nd Battery Pack.
External monitor
An external analog monitor can be connected to the external monitor port on the
computer and Slim Port Replicator. The computer supports VGA and Super VGA
video modes. To connect a monitor, follow the steps below.
CAUTION: If an external monitor is connected to the computer, do not
connect the Slim Port Replicator. First disconnect the external monitor
from the computer then connect the Slim Port Replicator and use its
external monitor port.
NOTE: The Resume feature can be used with an external monitor. Simply
enable Resume and the computer will maintain the data as it is displayed
on the external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor’s power on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
You can use the HW Setup to select between Auto-Selected and
Simultaneous displays. Refer to Chapter 7, HW Setup and Passwords.
To Next Page
Loading...
Need help?
General