POWER AND
P
OWER-UP MODES
6-13
Installing the Battery Pack
To install a Battery Pack, follow the steps below.
CAUTION: The Battery Pack is a lithium-ion polymer battery, which can
explode if not properly replaced, used, handled or disposed of. Dispose
of the battery as required by local ordinances or regulations. Use only
batteries recommended by TOSHIBA as replacements.
1. Be sure the computer’s power is off and all cables are disconnected.
2. Insert the Battery Pack.
Figure 6-2 Installing the Battery Pack
3. Secure the battery lock.
Replacing the Battery Pack
BATTERY P ACK
To Next Page
Loading...
Need help?
General