7-1
HW SETUP
AND
PASSWORDS
Chapter 7
HW Setup and Passwords
This chapter explains how to use TOSHIBA HW Setup program to configure your
computer and how to set passwords.
HW Setup
TOSHIBA HW Setup lets you configure settings for display, CPU, boot priority,
USB, LAN, general, password and device config.
NOTE: If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to the
computer.
Refer to the Supervisor password readme file for details on enabling/
disabling access to HW Setup. The path to the readme file is
C:\ProgramFiles\TOSHIBA\Windows
Utilities\SVPWTool. In the SVPWTool directory, open the
readme.htm file.
Accessing HW Setup
If you are using Windows XP, click start, click Control Panel, click Printers and
Other Hardware and select TOSHIBA HW Setup to run HW Setup.
If you are using Windows 2000, click Start, point to Settings, click Control
Panel and select TOSHIBA HW Setup to run HW Setup.
To Next Page
Loading...
Need help?
General