Connecting
a
VCR
with
S-video
and
a
cable
box
An S-video connection will provide better picture performance than a standard (composite) video cable.
TV
lower
back
panel
l
~Jl
~
PC
IN
ANTI750l
You will need:
• coaxial cables
• S-video cable
- Do not connect both types
of
video cable to VIDEO 1
at
the same time
or
the picture performance will
be
unacceptable.
• standard audio cables
- Ifyou have a mono
VCR,
connect UMONO on the
TV
to
your VCR's audio outterminal using the white audio cable
only.
Note: When you use a Cable box, you
may
not
be
able to use
the remote control to
program
or
accesscertain features on the
TV.
1
14
To view basic and premium Cable channels:
Tum
OFF the VCR. Select the ANT video input source on the
TV.* Tune the TV to channel 3
or
4 (whichever channel the
Cable box output is set to). Use the Cable box controls to
change channels.
To view the VCR:
Tum
ON the VCR. Select the VIDEO 1 video input source on
the TV.*
*
To
select the video input source, press INPUT on the remote control
(~page
21).
To
program the
TV
remote control
to
operate other
devices, see Chapter
3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may sUbject you
to
civil and criminal
liability.
To Next Page
Loading...
Need help?
General
