To clear the input labels:
1 Press
M~U
and open the Preferences menu.
2 Highlight Input Labeling and press
@.
3 Highlight Reset and press
@.
4 Press
....
or
~
to select the desired label for that input
source.
If
a particular input is not used, you can select
Hide as the label, which will cause that input to be
"grayed out" in the Input Selection screen and skipped
over when you press
~
on the remote control.
5
To
save the new input labels, highlight Done and
press@.
To revert to the factory default labels, highlight Reset
andpress@.
To
add
a favorite channeVinput:
1 Tune to the channel
or
input.
2 Press and hold
FAV
BR~5ER
for 3 seconds.
Note:
Additionsare
added
to the
beginning
of
the Favorites list
on the left side
of
the Channel Browser™.
The Favorites Browser allows you to quickly set up a favorite
channels/inputs list that is integrated into the Channel
Browser™.
1 Press
FAVB~ER
to open the Favorites browser list.
2 Highlight the channel
or
input to delete by pressing
;
....
Ort;~.
3 Press and hold @ for 3 seconds. The channeVinput will
be removed from the Favorites list.
To delete a favorite channeVinput:
Favorites
Browser
Tuning
channels
The Channel
Browser™
provides an easy navigation interface
for all your channels and inputs. This feature allows you to:
• Navigate the contents
of
all
of
your inputs.
• Keep a list
of
your favorite channels (see "Favorites
Browser," below).
• Keep a history
of
the last 32 channels or inputs viewed.
• Quickly surfand tune your recently viewed channels/inputs
from the Channel
Browser™
History List (illustrated on the
next page).
• Surfvia Browse mode (to immediately tune channels as you
highlightthem in the Channel Browser™)
or
Select mode (to
surf over channels in the Channel
Browser™
before you
select one to tune).
• Quickly change inputs from the Inputs List.
Tuning
channels
using
the
Channel
Browser™
(j)
.
(j)
I
CD
to Select • N.YlgeIe
10
ANT
o
VCR
f)
Cable
e
Video
Recorder
e
ColorSlream
H02
(Hidden)
o
DTV
o Satellite/OSS
G
DVD
(j)PC
Input
Selection
screen
with
all
inputs
labeled
except
input
4,
which
has
been
hidden.
(j)
•
(j)
I
CD
to Select Navigate
10
ANT
o
Video
1
f)
Video
2
e
ColorStream
HDl
e ColorSlream
H02
0HDMIl
o HDMI2
G HDMI3
(j)PC
Input
Selection
screen
with
no
inputs
labeled.
Input
labeling example:
The screen below left shows the default Input Selection
screen (with none
of
the inputs labeled as a specific device).
The screen below right is an example
of
how you could label
the inputs
if
you connected a VCR to VIDEO
I,
Cable TV to
VIDEO 2, a video recorder to ColorStream
HDI,
a DTV set-
top box to HDMI
I,
a satellitelDSS set-top box to HDMI2, and
a DVD playerto HDMI 3. Also note that the ColorStreamHD2
input is labeled "Hidden," which means that input will be
skipped over when
~
is pressed.
To set
up
the Channel Browser™:
1 Press
M~U
and open the Preferences menu.
2 Highlight Channel Browser Setup and press
@.
3
Press.
to highlight Navigation, and then press
....
or
~
to select either Browse Mode
or
Select Mode.
I
36
To Next Page
Loading...
Need help?
General
