Using
the
HDMI
settings
feature
(only
for
models
26HL47
,
32HL67US,
37HL67S,
and
42HL67US)
This new
HOMI
capability will be grayed out
on
non-HOMI
inputs.
Some
HOM
I legacy sources may not work properly with your
HOMI TV.
If
you experience any problems, please unplug
your
HOMI
cable first and then try setting the Lip-Sync
Latency to
Off. Adjusting the setting should allow your HOMI
legacy source to operate properly with your TV.
• Lip-Sync Latency:
On
This option activates an audio/video display timjng
adjustment function that allows
HOMI
source devices to
accurately perform synchronization automatically.
Note: Ifyour
HoMI
connection
is
capable
of
1D8Dp
and/oryour
TV
is capable
of
refresh rates greater than 60Hz, you will need
a Category 2 cable. A conventional HOMI/O
VI
cable
may
not
work properly with this setting.
To
set
the
HDMI
Settings:
1 Select the appropriate
HOMI
input (HOMI
1,
HOMI
2,
or
HOMI3).
2 Press
M~U
and open the Setup menu.
3 Highlight HDMI
Settings
and press
@.
4 Press
....
or
~
to select On
or
Off
.
5 To save the new setting, highlight Done and press
@.
To
revert to the factory defaults, highlight
Reset and press
@.
Using
the
advanced
audio
settings
features
Using
the
SRS
WOW
M
surround
sound
feature
SRS
WOW™
is a special combination
of
SRS Labs audio
technologies (SRS
30,
SRS Focus, and SRS TruBass) that
creates a thrilling surround sound experience with deep, rich
bass from stereo sound sources. Your
TV's
audio will sound
fuller, richer, and wider.
To
adjust
the
WOW™
settings:
1 Put the
TV
in STEREO mode (lIE "Selecting stereo/SAP
broadcasts" on page 45).
2 Press
M~U
and open the
Audio
menu.
3 Highlight Advanced
Audio
Settings
and press
@.
4 Press T
or
..
to highlight the
WOW
feature you want to
adjust, and then press
....
or
~
to adjust the item.
Advanced
Audio
Settings
• WOW: SRS
30
- To turn the surround sound effect
On
or
Off.
Note: If the broadcast
is
monaural, the
SRS
30
effect
will not work.
• WOW: SRS Focus -
To
turn the vocal emphasis effect
On or Off.
• WOW: SRS TruBass - To select the desired bass
expansion level
(Off, Low,
or
High).
5 To save the new settings, highlight Done and press
@.
To revert to the factory defaults, highlight Reset and
press@.
WOW,
SRS
and ce) symbol are trademarks of
SRS
Labs, Inc.
WOW technology
is
incorporated under license from
SRS
Labs, Inc.
57
I
To Next Page
Loading...
Need help?
General
