Setup/Installation
menu
layout
The Installation menu contains the Terrestrial and System Status menus.
To
open the Installation menu (illustrated below), press
M~U
on the remote control
or
TV control panel, open the Setup menu,
select Installation, and press @.
t
Press
M~U,
open the
Setup menu,
and then
open the
Installation
sub-menu.
Terrestrial
System Status
System Information
-+
[Opens the Input Configuration menu]
-+
[Start]
-+
[Scans for new channels on ANT]
-+
[Opens the Channel AddlDelete menu]
-+
[Opens the Signal Meter menu]
-+
[Opens the System Information screen]
Navigating
the
menu
system
You can use the buttons on the remote control or
TV
control
panel to access and navigate your
TV's
on-screen menu
system.
• Press
M~U
to open the menu system.
• When a menu is open, use the up/down/leftJright arrow
buttons (• .......
~)
on the remote control
or
TV control panel
to move in the corresponding direction in the menu.
• Press @ to save your menu settings
or
select a highlighted
item. (A highlighted menu item appears in a different color
in the menu.)
• All menus close automatically
if
you do notmake a selection
within 60 seconds, except the signal meter menu, which
closes automatically after about 5 minutes.
•
To
close a menu instantly,
press~.
I
28
Note:
•
The
menu background may sometimes appear black,
depending on the signal the
TV
is
receiving.
This
is
not a
sign
of
malfunction.
•
The
Video sub-menu appears with a black background,
which looks different from other menus.
To Next Page
Loading...
Need help?
General
