To
add
a channel to the channel memory:
Highlight the unchecked box next to the channel number you
want to add, and then press @ to check the box.
To manually
add
digital subchannels on a physical
channel:
Use the Channel Numbers and the Dash
(GQ2)
on the remote
control to enter the channel number (for example, 56-1).
If
the channel
is
found, the number will be added to the list and
the box will be checked.
If
the channel is not found, a message will appear.
To remove a channel from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press @
to
uncheck the box.
To save your new settings:
Highlight Done and press
@.
To
revert
to
your
original settings:
Highlight Cancel and press @ before saving.
To remove all channels from the channel memory:
Highlight Reset and press
@,
and then highlight Done and
press@.
Channel Add/Delete
To remove encrypted channels from the channel
memory:
If
an encryptedchannel is accidentally added to the channel list
by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tunes to an encrypted channel, the
following message will appear.
Press
"Q)"
button while the message is on the screen to
remove the unnecessary channel from the channel list.
Labeling
channels
A list
of
common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the TV. You will
be able to view and assign these logos from the
Channel
Labeling
window.
If
the desired channel label is not provided
in the list, you will be able to manually enter/edit labels using
the software keyboard.
To assign channel labels:
1 Press
M~U
and open the Preferences menu.
2 Highlight Channel Labeling and press
@.
The Channel Labeling window opens.
3 Press
r£1
or
~
to select the channel you want to label.
4 Press A
T~
~
to highlight the desired channel label and
press@.
5 Repeat steps 3 and 4 for other channels.
6 To save your settings, highlight Done and press @.
The maximum number
of
labels that can be stored is 128.
To remove channel labels:
1 Open the Channel Labeling window.
2 Press
r£1
or
~
to select the channel for which you want to
remove the label.
(continued)
31
I
To Next Page
Loading...
Need help?
General
