Toshiba e-STUDIO 257 Troubleshooting Guide

6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
110 Printing Problems (Network Related)
 Novell print in a NetWare environment
No
.
Check... Yes No Corrective Action
1 Are the IPX/SPX protocols enabled? Is
the correct frame type selected?
Next
Step


Set up the IPX/SPX correctly.
2 If applicable, did you successfully set up
queue-based print?
Next
Step


Set up the NetWare server properly.
3 Did you configure the equipment for a
NetWare connection?
Next
Step


Set up the NetWare network settings
correctly.
4 Did you configure the equipment for
NetWare print service?
Next
Step


Set up the NetWare print service
correctly.
5 Were the proper printer drivers
installed?
Next
Step


Refer to the Software Installation
Guide to install the proper printer
drivers.
6 Is the IPP port configured with the
correct URL?
Next
Step


Refer to the Software Installation
Guide to configure the proper port.
7 Can you see the equipment in Windows
Network Neighborhood?
Next
Step


Check that the SMB protocol is enabled
in the client computers.
8 Can you print to the equipment?
End 
See the following section to fix the
problem.
 P.90 “Cannot print with the
equipment (network connection
problems)”

Toshiba e-STUDIO 257 Specifications

General

Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows
Print Speed	25 ppm (A4)