EasyManuals Logo

Toshiba e-STUDIO 257 Troubleshooting Guide

Toshiba e-STUDIO 257
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
1 TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Charger 75
Cleaning the Charger
If the inside of the charger is dirty, staining may appear on the copied image. Clean the charger following the
procedure below.
3
Close the front cover.
1
Open the front cover of the equipment.
2
Carefully pull the cleaner out until it comes to a stop,
and then carefully reinsert it straight into its original
position. Repeat this step a couple of times.
Check that the cleaning knob is fully inserted after cleaning.

Table of Contents

Other manuals for Toshiba e-STUDIO 257

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba e-STUDIO 257 and is the answer not in the manual?

Toshiba e-STUDIO 257 Specifications

General IconGeneral
Scan Resolution600 x 600 dpi
Duplex PrintingYes
Print TechnologyLaser
Copy Resolution600 x 600 dpi
ConnectivityUSB, Ethernet
FunctionsPrint, Copy, Scan
Paper SizeA4, A5, B5
Fax Transmission Speed33.6 kbps
Operating System CompatibilityWindows
Print Speed25 ppm (A4)

Related product manuals