Toshiba e-STUDIO 257 Troubleshooting Guide

1 TROUBLESHOOTING FOR THE HARDWARE
58 Clearing a Staple Jam
 Staple jam in the Saddle Stitch unit
 Saddle Stitch finisher MJ-1108
1
Open the front cover of the finisher, and pull out the
Saddle Stitch unit until it stops.
2
Remove the staple cartridge.
3
Raise the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the top staple sheet.
5
Holding the knob, lower the guide, and return it to its
original position.
2
1
2
1

Toshiba e-STUDIO 257 Specifications

General

Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows
Print Speed	25 ppm (A4)