Toshiba e-STUDIO 257 Troubleshooting Guide

1 TROUBLESHOOTING FOR THE HARDWARE
18 Clearing a Paper Misfeed
 If paper misfeeds occur frequently
The following are the common causes of paper misfeeds. If the problem persists, check for the following
situations.
 An unsuitable original is placed on the Reversing Automatic Document Feeder.
 Unavailable paper with the equipment is used.
 Paper sizes are not consistent between the size in a drawer or the bypass tray and the size registered in
the equipment.
 All the misfed paper has not been removed.
 There is too much of a gap between the paper and the side or end guide in the drawer.
 The amount of paper placed in a drawer exceeds the limit indicated on the side guide of the drawer.
 Paper misfeed in the Reversing Automatic Document Feeder (optional) (Lower)
1
Open the Reversing Automatic Document Feeder.
2
Lower the green lever, open the reverse cover and
remove the original.
3
Close the Reversing Automatic Document Feeder.
2
1
1

Toshiba e-STUDIO 257 Specifications

General

Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows
Print Speed	25 ppm (A4)