1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 17
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a paper misfeed
1
Clear the paper misfeed
Clear the paper misfeed following the guidance shown on the touch panel. Press or to scroll the
pages.
2
After clearing the misfeed, close all the opened covers.
The equipment starts the warm-up. Follow the guidance on the touch panel.
Tips on removing the misfed paper
Note the following points in removing the misfed paper.
Remove the misfed paper carefully so as not to tear it.
To avoid tearing the misfed paper, remove the paper slowly with both hands. Using force may tear the paper,
making it more difficult to remove. See also that no pieces of torn paper are left inside the equipment.
When the paper misfeed sign remains after removing the misfed paper:
Depending on the timing of the occurrence, no misfed paper may be found where the paper misfeed sign
indicates. If the sign does not disappear after you have removed the misfed paper, follow the steps as
instructed on the touch panel.
Do not touch the fuser unit or the metal portion around it.
Do not touch the fuser unit or the metal portion around it when you
remove the paper misfed in the right side of the equipment. This
could burn you or the shock could cause you to get your hand
injured in the machine.
Do not touch the photoconductive drum.
When you remove the paper misfed in the right side of the
equipment, be sure not to touch the photoconductive drum. This
could stain copy images.
To Next Page
Loading...
Need help?
General
