Toshiba e-STUDIO 257 Troubleshooting Guide

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 23
1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the bypass tray
2
Check that there is no folded/curled paper or
overloading, and then close the drawer of the Large
Capacity Feeder.
Be sure that the height of the stacked paper does not
exceed the line indicated inside of the side guides.
1
Move the green paper holding lever toward the
outside.
The paper can now be removed.
2
Pull out the misfed paper in the bypass tray.
3
Place paper in the bypass tray again and then move
the green paper holding lever toward the inside.
If a sheet of paper is stained, folded or torn, replace it with a
new one.
2
1

Toshiba e-STUDIO 257 Specifications

General

Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows
Print Speed	25 ppm (A4)