137
4
4. SETTING COPY FUNCTIONS
You can change the system behaviors for the copy operation, such as maximum number of copies, auto 2-
sided mode, and the sort mode priority.
1
Press the [COPY] button in the ADMIN menu.
• The COPY screen is displayed.
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. P. 8 7
2
Specify following items as required.
• MAXIMUM COPIES — Press the number button that indicates the maximum number of copies to be allowed.
• AUTO 2-SIDE MODE — Press the button of the 2-Sided mode that initially applies to copy settings when orig-
inals are set in the Automatic Document Feeder. When the [OFF] button is selected, the initial setting of the 2-
Sided mode will be [1 -> 1 SIMPLEX] when originals are set in the Automatic Document Feeder.
When the [1->2] button is selected, the initial setting of the 2-Sided mode will be [1 -> 2 DUPLEX] when origi-
nals are set in the Automatic Document Feeder.
When the [2->2] button is selected, the initial setting of the 2-Sided mode will be [2 -> 2 DUPLEX] when origi-
nals are set in the Automatic Document Feeder.
When the [USER] button is selected, the screen to select the 2-Sided mode will be displayed when originals
are set in the Automatic Document Feeder.
• SORT MODE PRIORITY — Press the sort mode that applies prior for copy jobs. If the [STAPLE] button is
selected, the output is stapled on the upper left corner as the default. To select the [STAPLE] button, the
optional finisher must be installed.
3
Press the [Next] button to display the next screen.
To Next Page
Loading...
Need help?
General
